Compact design provides contunious & problem-free feeding

  • Provides usage of filler collected in the filter unit and externally supplied mineral filler together or separately in asphalt production.
  • Provides transfer of unusable filler produced during aggregate drying process that is collected in filter unit to surplus dust storage silos.
  • A unique system for handling (adding to asphalt) externally supplied mineral filler. In this system a small (watering) mixer is used to discharge filler to trucks. Dust is eliminated and environmental impact does not occur. 
  1. Filter
  2. Foreign Filler Silo
  3. Filler Elevator
  4. Air Shock Pads
  5. Silobas Filling Pipes
  6. Continuous Level Sensor
  7. Filler Service Silo
  8. Max. Level Sensor
  9. Min. Level Sensor
  10. Filler Weighing Unit
  11. Filler Storage Silo
  12. Discharge Pipe
  13. Vibrating Motor
  14. Filler Discharge Lid
  15. Screw Type Conveyors
  16. Filler Discharge with Watering System
  17. Surplus Dust Silo
  18. Surplus Dust Elevator


Energy saving and cost reduction by integrating the new closed aggregate preparation system to asphalt plants

RATech Integrated to Asphalt Plant;
* 70% RAP material used for binder course
* Up to 50% RAP material used for wearing course
E-MAK is the only asphalt plant producer with its own trial facilities.
E-MAK Asphalt Plants of the future...

E-MAK asphalt plants are produced under EU directives; Machine Safety Directive 2006/42/EC, Electromagnetic Compatibility Directive 2004/108/EEC and Low Voltage Directive 2006/95/EEC and in line with the EN standards with its CE marking. Also, E-MAK proudly holds : A GOST Certificate, ISO 9001 Quality Management System certificate, ISO 14001 Environmental Management System certificate and OHSAS 18001 Occupational Health and Safety Management System certificate.
Bauma 2016

It was E-MAK’s year this BAUMA...

Interest in the Simge CHALLENGER, RAtech 3 Angle and Green Type on show at the world’s largest international machine and construction exhibition for its sector was tremendous.

4. Eurasphalt & Eurobitume Congress: “Innovation Session” - E-MAK Simge CHALLENGER presentation
EAPA and Eurobitume (E&E) international congress held every 4 years which debates Europe’s road standards and technical innovations, was held in Copenhagen, Denmark on 21-23 May 2008.

E-MAK Machine Construction Trading & Industry Co.
Address: Yunuseli Mh. Yunuseli Bulvar No:75 16165 Osmangazi - Bursa / TÜRKİYE
Telephone: +90 224 248 90 71 (pbx) & Fax: +90 224 248 88 72

Copyright 2010 © E-MAK | SİMGE GROUP